Network Time Server - NTS 01
|
The Tekron NTS 01 is an exceptionally accurate, yet simple to install, NTP Time Server for synchronizing control and SCADA networks. The electrical isolation of the NTS 01, together with its ability to withstand extreme temperatures and humidity, means that the NTS 01 is ideal for use in harsh environments such as power plants and substations. |
 ..view more images.. |
Key Features
Input/Output Signals
Specifications
Accessories
Resources
| Isolated power supplies |
| Redundant power supply |
| UTC and LST with user defined DST options |
| Master/Slave function |
| Able to function as a Stratum 1 Time Server |
| Available with up to 5 ports, each port functions as an NTP time Server. |
| NTP (v2 - RFC1119, v3 - RFC1305, v4 - No RFC) |
| NTP Unicast, Multicast |
| SNTP Simple Network Time Protocol (RFC4330) |
| SNMPv3 (RFC3584) |
| DHCP (RFC2131) |
| Telnet (RFC854) |
| MD5 Authentication (RFC1321) |
| SMTP |
| IPv4 |
| BOOTP |
| ARP |
| UDP |
| TCP |
| TFTP |
Click here for a PDF version of the specifications (155 KB).
| Physical | |
| Design: | 1U 19” rack mount 160mm wide x 40mm high x 160mm deep |
| Measurements: | (W) 160mm x (D) 155mm x (H) 40mm |
| Weight: | 0.8Kg |
| Antenna: | 80mm diameter x 60mm high cone |
| Display: | LCD 2 line x 16 characters |
| Outputs | |
| Base Unit: | 2 RJ45 UTP connectors 10Mbs Ethernet port (10 baseT) Each port has a unique programmable IP address |
| Expansion Unit (Option 1): | 3 RJ45 UTP connectors 10Mbs Ethernet port (10 baseT) Each port has a unique programmable IP address |
| Protocols supported | |
| ARP, TCP, ICMP, Telnet, TFTP, DHCP, SNMP and BOOTP | |
| Protocols supported: | NTP/SNTP |
| Power supply | |
| Range options: | L = 12-36Vdc M = 20-72Vdc H = 90-300Vdc 240Vac-24Vdc GPO plug pack |
| Power drain: | 3W max (dependent on load attached) |
| Environmental - NTS 01 unit | |
| Operating Temperature: | -10°C to +65°C |
| Humidity: | 95% to non-condensing |
| Environmental - Antenna | |
| Operating Temperature: | -40°C to +85°C |
| Humidity: | To 100% |
| Accuracy | |
| Output accurate to within 1 millisecond of UTC when 4 or more satellites being tracked. | |
| Lightning Protection Kit | |
| The antenna lightning protection kit affords additional protection through the use of an impulse suppressor installed in the antenna lead-in coax cable. In the event of a lightning-derived high voltage surge occurring on the coaxial cable, the impulse suppressor activates, short-circuiting the cable directly to the protection ground. | |
| Kit contents (all components required to install lightning protection are included): | - Poly-phasor DGXZ+06NFNF-A Impulse Suppressor - 2 x N-type Male Crimp Style Coaxial cable - Connector set to match antenna cable - Crimp Tool to match the above connectors RG59). |
| Antenna mount | |
| An adjustable 500mm powdercoated steel mounting bracket. | |
|
Technical Specifications datasheet [Download datasheet - 155 KB] |
.jpg){kind=icon} |
Configuration Software & User Manual |